Cricut Snowflake Ornament Jingle Jangle Blog Hop

This 3D snowflake was made using the Winter Lace Seasonal Cricut cartridge and acrylic sheets.

I put the thin acrylic sheet directly onto a fairly sticky Cricut mat. Using the deep cut blade, I cut the acrylic at speed 5, pressure 5, blade 6 and multi cut 4. The snowflake is cut at 4-3/4″.

Even though I used the max settings and multi-cut 4, I still couldn’t get the Cricut to cut the acrylic all the way through. It did do a beautiful job scoring it though! I cut the 2 pieces apart because I had decided to cut the flakes out by hand if necessary.

My hand is stained pink from some Copic markers I used earlier. LOL!
I was able to snip a few places in the acrylic and then tear it away from the edges. This method would not work for the insides, but I think they look pretty scored too.

I LOVE my Tim Holtz Scissors! Those scissors can cut tough things like this acrylic and then snip ribbon nicely right afterward. That speaks volumes about this product.

It’s beginning to look a lot like ornament…everywhere I go.

I used that Bic Mark-It marker to color in some of those “embossed” parts of the snowflake. I hadn’t tried those markers on acrylic before, but they work beautifully!

I used a hole punch to make some holes in the ornament so I could hang it up. TA DA!! All done. One thing I will say…it’s very difficult to take a picture of clear acrylic. LOL!
Leave a comment to be eligible to win the very hard to find Lace Tree Cuttlebug Embossing Folder:
And the Winner IS:
# melraycourt Says:
December 19th, 2010 at 10:50 AM e
I love this website!!! I’m fairly new, so just learning! I would LOVE to win!!! Thank you for sharing your talents and ideas with all of us!!!! Merry Christmas!!!
The folder the winner will receive is sealed in clear plastic from Provo Craft, but doesn’t have the cardboard. 😉

The Next Blog on the Hop is the great Momo!!
Here’s the list of everyone who is in the blog hop:
Gale http://www.thehappystamper.com
Ruthie http://septemberninth.blogspot.com
Felisa http://felisa21.blogspot.com
Debi http://dizzylizzyscreations.blogspot.com
Evelyn http://evinadas.blogspot.com
Janie http://www.typicalscrapbooker.blogspot.com
Joy https://joyslife.com YOU’RE HERE!!
Mari (Momo) http://madebymomo.blogspot.com
Meredith http://www.meredithscraps.com
Nicole http://primpedinpaper.wordpress.com
Raven http://love4stamps.blogspot.com
Theresa http://www.thescrapbookingqueen.com
Tracy http://www.craftjunkietoo.com
Yolanda http://yoliebean.blogspot.com
wow joy only you could be this creative!! Loved it
Love the snowflake! You always have such wonderful inspiration for us. Thanks papermemories4u at yahoo dot com
Wow, that is really cool. You always come up with the best ideas! Thanks so much for sharing your talent. AJ – aj_822(at)yahoo(dot)com
Love Love Love your snowflake!
I have been looking for that Christmas tree folder. Where did you find it.
Thanks
Tricia
Gorgeous ornament! TFS and thanks for the hop.
[email protected]
I love your snowflake. It looks delicate and I’m sure it would look beautiful in the tree. TFS Susan
[email protected]
I think that snowflake turned out beautifully! Great job!
Awesome! I’m going to have to try that with my Expression. Love those snowflakes. Thanks for sharing. ~Margaret~ [email protected]
Oh wow that snowflake worked out beautifully. Lovely idea.
Merry Christms
kimthompson68(at)sky(dot)com
Kim xXx
Joy this is so cute!~ I have some acetate that is pretty thick I bet this would work on too! Great job getting a pic too 😉
TFS!
{{HUGS}]
Yay, I registered now I can tell you how taleneted you are! Thank you so much for sharing! You instructions are so clear!
Contact Info: incase I get lucky enough to win that amazing blog candy! HAPPY HOLIDAY’s :o) [email protected]
This is really pretty! May need to get the deep cut blade 😉 Thanks for sharing. Merry Christmas 🙂
~Suzy [email protected]
Love it. That would look great on our tree. thanks so much for sharing.
Have a Merry little Christmas
Dawn
matilda425 at gmail dot com
Great idea! I love how inspiring you are even in these last few days before Christmas. I have so much to do (as we all do at this time of year) but your blog makes me want to make some time to be crafty! Thanks!
Beautiful, Joy! I wouldn’t have thought to use this material in the cricut! I wonder if it would cut all the way through with a thinner ml–maybe like the acetate used on an overhaed projector. hmmmm.
Love your ornament! So pretty!
WOW.. I love them, so creative 🙂 thanks for sharing
shelley
[email protected]
Beautiful. I save all packaging that is clear and cut it with my cricut. Running acrylic through my cuddlebug makes it appear frosty too. Love this snowflake
How fun is this? I was just checking in to see what was new with you Joy and to my surprise there’s a blog hop today!!!!!
The snowflake is FABULOUS!!! I MUST find this acetate.
Pretty pretty snowflake. I like the way you used the bic marker. I honestly thought those holes were punched out!
This is soooo pretty!! I love the marker on it!
This is a very beautiful ornament. I have cut the acrylic scrapbook sheets from A. C. Moore with just my regular blade and it did a beautiful job. Think I need to try these. Thanks for sharing and the chance to win. I am a follower. patnbobcuddy at gmail dot com
What a fun snowflake!
WOW…this turned out very nice. Hugs, Debi
love your ornament. i lovethe cuttlebug tree i haven’t seen this in stores. thanks for the chance to win.
http://craftywithjoann.blogspot.com
I like the way this snowflake looks. What a great way to improvise by coloring in the “embossed” areas! I wonder if you could somehow add some glitter, would it stick to the acrylic? I’m going to have to try this idea!
Loved the snowflake. I’m going to try it and add some stickles also.
It turned out really cute. I must admit, however, I’m glad you used the project even though it didn’t work like it was supposed to. It’s nice to see ways to adjust things when they don’t quite work out.
Very cute snowflake, it’s definitely a project to try. Thanks for sharing.
Sweet, never would have thought that i could do acrylic in the cricut. I did a similar ornament at Archiver’s with a premade snowflake. Then ran it through the texture boutique to emboss it, then used white acrylic paint dabbed over top. Very cute as well!
JOY – This ornament is just beautiful. I love how the coloring just showcased the dimension.
I love your snowflake!
Thanks for a chance at your great giveaway!
just beautiful! love it 🙂
Beautiful snowflake!!!!! thanks for sharing!
This is awesome! I never thought about cutting acrylic. Love it! TFS.
Happy Scrappin’
Sue B
http://susanascorner.blogspot.com/
Your snowflake is so cool. I haven’t seen this cartridge yet, it is now on my Christmas list. I already have the cuttlebug folder. So if you pick me, please pick another # and bless someone else with it. Merry Christmas!
[email protected]
Absolutely beautiful!!!!!!!!!!!!!!!!!1 TFS. I believe I have a CuddleBug sitting under the tree, so it would be ever so wonderful to win this embossing folder (plz).
cureta2 at yahoo dot com
Now I have to get this cart. Your snowflake ornament would be perfect for one of my trees, it’s decorated in blue and white with mostly snowflake themed ornaments on it. I’ve never seen that embossing folder before. I can imagine so many ideas for it.
I love this website!!! I’m fairly new, so just learning! I would LOVE to win!!! Thank you for sharing your talents and ideas with all of us!!!! Merry Christmas!!!
Love your ornament and your blog. Thanks for the chance to win the Cuttlebug folder! I have really been wanting this one!
~Coo-Coo Cricut
Love the snowflake! I have been trying to find this tree with no luck. Thanks for the chance to win it!
I enjoy checking out your web site at work each morning, you always bring a smile to my face. A great positive way to start off the work day ! Great job Joy!
Your website is so fun! Thank you for all you contribute. I’d love to win the Cuttlebug–one can never have enough toys!! Merry Christmas!!!
I love the snowflake….TFS
I can’tget my cricut to cut through chip board, so won’t even try the acrilic sheets! LOL! But still love my Cricut ! Tried ordering the tree embossing folder, but always out of stock . So would LOVE to win this giveaway!!!!
i love that snowflake and the pictures are great of it
Joy, you are so Crafty! love it,Hope I win ,but I don’t have a Cuttlebug but want One! Joy
i have never used the acrylic sheets. i save all the hard plastic covers from birthday cakes and things like that and they work well.
that is suchhh a cute snow flake! you did great joy!
Joy,
You are so clever!!! 🙂 I love your pretty snowflake ornament!
Thank you so much for sharing,
Jennifer
partridgelu at yahoo dot com